Results 1 to 4 of 4

Thread: open boundary condition in tide and storm surge simulation

  1. #1
    Join Date
    Oct 2006
    Location
    physical oceanography institute
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    open boundary condition in tide and storm surge simulation

    Can anybody send me a fortran code dealing with ocean tide and storm surge simulation? And maybe only the code on how to set the open boundary condition will be ok!

  2. #2
    Join Date
    Dec 2004
    Location
    GOSAT, CGER, National Institute of Env. Studies (NIES), Tsukuba
    Posts
    337
    Thanks
    1
    Thanked 15 Times in 11 Posts

    A partial answer

    Hi Ertyy,

    This is only a hint where you can find a more complete answer
    for your questions. Since you are looking for Tidal model, perhaps
    more closely, the open boundary condition codes, Princeton Ocean
    Model (POM) would be an appropriate choice to investigate for
    your purpose. POM has tidal model component with a few choices
    of open boundary conditions (like Orlansky, radiation boundary etc).
    You may brows through their website and may extract the code
    from there.

    Keep watch this website, someone else may provide you a more
    complete answer.

    -Vinu

  3. #3
    Join Date
    Jun 2009
    Location
    puerto rico/dwcl
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    this is very interesting. thanks

  4. #4
    Join Date
    Jan 2017
    Location
    Кизляр
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Blog Entries
    1
    The tides are the result of the rotation of the Earth and the whirlpools.

    There is a strict pattern; tides are formed, not across the coast of the seas and oceans, but only on those coasts where the high angular velocity of the currents. And the higher the velocity of currents, the higher the amplitude of the tidal wave. On the rectilinear coasts, where the currents do not have angular velocity, tides and ebbs do not form.

    The waters of lakes, seas and oceans of the northern hemisphere rotate counterclockwise, while the waters of the southern hemisphere rotate clockwise, forming giant whirlpools.

    As is known, everything that rotates, including whirlpools, has the property of a gyro (yule) to maintain the vertical position of the axis in space, regardless of the rotation of the Earth.

    If you look at the Earth from the side of the Sun, the whirlpools, spinning with the Earth, capsize twice a day, thanks to which the whirlpools precess (swing by 1-2 degrees) and reflect the tidal wave around the perimeter of the whirlpool. http://goo.gl/AM5g1s

    The waters of the White Sea rotate counter-clockwise, forming a huge whirlpool-gyroscope, which, precessing, reflects a tidal wave along the entire perimeter of the White Sea.
    A similar pattern of tides and ebbs is observed in all lakes, seas and oceans.
    http://tapemark.narod.ru/more/22.png

    The waters of the Mediterranean Sea rotate counter-clockwise, forming tides, 10-15 cm high. But in Gabes Bay, "what?" Off the coast of Tunisia, the height of the tides reaches three meters, and sometimes more, and this is considered one of the mysteries of nature. But at the same time, in the Bay of Gabes the whirlpool turns, precessing the reflecting additional tidal wave ?.
    A tidal wave in the Amazon River creates a huge planetary maelstrom a few thousand kilometers in diameter, rotating between South America and North Africa, embracing the mouth of the Amazon River.
    The scheme of motion of a tidal wave, along the perimeter of the North Atlantic planetary maelstrom. https://youtu.be/ZEhm_ONTQKc

    The length of the tidal wave depends on the diameter of the whirlpool. And the height of the tidal wave depends on the speed of rotation of the whirlpool of the orbital velocity of the Earth, and the time of the tilting of the whirlpool (12 hours).
    A = V1 V2 / t
    where: A is the amplitude of the tidal wave (precession angle).
    V1 - rotation speed of the whirlpool.
    V2 is the orbital velocity of the Earth.
    t - the time of tilting of the whirlpool (12 hours).

    The vortex theory of tides can be easily verified from the connection of the height of the tidal wave with the rotation speed of the whirlpools. The height of the tidal wave can determine the location of the whirlpools. Drawing on a map of the depths and currents of the seas and oceans.
    Continuation: Forum NIYA MEPhI. The theme of "Tides and ebbs is the result of the rotation of the Earth and whirlpools." https://mephi.ru/communication/forum...5498/messages/

Similar Threads

  1. Replies: 0
    Last Post: 7th June 2005, 11:01 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •